Drop In Anchor

Drop In Anchor

Drop In Anchor are internally threaded anchors for and threaded rods. These are Zinc plated steel tubeler expension shield. The shield has four equally placed slots for a portion of its length and the bottom part is knurled. The bottom lip of the shield is tapered to allow maximum depth and holding power

  • Plumbing
  • Steel Constructions
  • Gratings
  • Cable trays
  • Air-Conditioning and Ventilation installations
  • Suspended Celings
  • Platforms
  • Consoles
  • Pipe Works
  • Attaching pipe works to celing and wells
  • Available in carbon steel & stainless steel
  • Maximum expension against the wall of the hole
  • steel is focused outward in four directions compressing against the wall of the hole.
  • Developed compression force is usually very high when compared to torque controlled anchors, hence low displacement.
  • Larger bearing area
  • fixes equipments that many require to be removed and replaced.
  • Flush fitting-No protrusions when not in use
Bolt Size Bolt Length(mm) Packing
M6 30 Variable
M8 30
M10 40
M12 50
M16 65
M20 80