Hit Anchor Or Pin Type Fastener

Hit Anchor Or Pin Type Fastener

Hit Anchors or Pin Type Fasteners is fast and easy to use expansion . No precise hole depth is required and installation condition can be adjusted from pin and nut. Nail made by high tensile material. A hardened drive pin comes along the assembly inserted in the bolt. The anchor is threaded on the upper portion where the drive pin is inserted. Other end of the anchor has four equally spaced slots for a portion of its length, with ribs extending the circumference of the anchor for a portion of its length.

  • Railings
  • Profiled Steel
  • Machines
  • Gratings
  • Fire Fighting Equipments
  • Lighting Fixtures
  • Consoles
  • Steel Constructions
  • Drill hole size is equal to actual anchor size, thus no templates required.
  • Quick and simple hammer set installation eliminates need of any special tools and also reduces installation time.
  • Easy (visually) inspection
  • Yellow Dichromate plating over zinc
Size Length Range(mm) Thread Size(mm) Drill Hole (mm) Ultimate Loads In Concrete(kN) Qnt. Per Box(pcs) Qnt. Per Cartoon(pcs)
M6 40-100 6 6 5 Variable Variable
M8 40-150 8 8 7.2
M10 50-200 10 10 13
M12 50-300 12 12 21
M16 75-400 16 16
M20 75-450 20 20
M24 100-600 24 24